SOLOVOX V9S

Here we’re talking about the SOLOVOX V9S, a full HD digital satellite receiver with support for Wi-Fi. The device already has a built-in Wi-Fi module, no additional USB Wi-Fi adapters are needed. There is also a very popular variant called the OPENBOX V9S.

General Specifications

Processor
  • 667Mhz (including Dolby)
Memory
  • DDR III 256 byte (2Gb)
  • Serial Flash 8M
Output
  • 480i/576i/480p/576p/720P/1080i/1080p
Network Protocol
  • Built-in Wi-Fi
  • Support USB modem
  • Support RS232 protocol
  • Support CCCAM, NEWCAMD, MG CAMD, MS CAM
  • Support PowerVU & Biss Key
  • Support Stalker, XTREAM, and m3u protocol
  • Support OTA update
  • SCPC & MCPC receivable from C/Ku band satellites
  • DVB S2 demodulator
Built-in web applications
  • YouTube, YouPorn, PornTube, REDTUBE
  • Support MARS TV X IPTV service (10000+ Live channels & thousands of VODs, Activate code is not built-in)
Fully compliant on video, audio, and image
  • Video: AV, DAT, FLV, ISO, M2TS, MKV, MOV, MP4, MPG, MTS, RM, RMVB, SWF, TP, TS, VOB, WMV, H.264
  • Audio: MP3, AC3, OGG, WMA
  • Image: JPEG, BMP, GIF, PNG
Power
  • Running: 100-240V 50/60Hz 25W
  • Standby: 1W
Display
  • LED
Language
  • English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish and Czech
USB
  • USB 2.0

The Unboxing

Packages

The main device is accompanied by its Power Adapter, HDMI Cable, Remote Controller, and User Manual.

Front Panel

The front panel is smooth and doesn’t have any port.

Side Panel

The side panel has an RS232 port (RS232), a USB port (USB), and an IC port.

  1. RS232 port (RS232): Connect the computer with a cable to upgrade firmware
  2. USB port (USB): Read information from USB devices
  3. IC port: Insert IC card to read it and watch pay TV
Back Panel (AV edition)

The back panel has a Power port (DC 12V), a USB port (USB), an AV port (AUDIO-R, AUDIO-L, VIDEO, and Coaxial ), an HDMI port (HD TV), an RJ45 port (ETHERNET), and an LNB 1 port (LNB IN).

  1. Power port (DC 12V): 12V power supply unit
  2. USB port (USB): Read information from USB devices
  3. AV port (AUDIO-R, AUDIO-L, VIDEO, and Coaxial): AV audio and video output
  4. HDMI port (HD TV): HDMI audio and video output
  5. RJ45 port (ETHERNET): Wire port
  6. LNB 1 port (LNB IN): Satellite signal input and 13/18V power supply output
Back Panel (Scart edition)

The back panel has a Power port (DC 12V), a USB port (USB), a Scart port (TV SCART), an HDMI port (HD TV), an RJ45 port (ETHERNET), and an LNB 1 port (LNB IN).

  1. Power port (DC 12V): 12V power supply unit
  2. USB port (USB): Read information from USB devices
  3. Scart port (TV SCART): Scart audio and video output
  4. HDMI port (HD TV): HDMI audio and video output
  5. RJ45 port (ETHERNET): Wire port
  6. LNB 1 port (LNB IN): Satellite signal input and 13/18V power supply output

6 thoughts on “SOLOVOX V9S

  • September 27, 2019 at 7:00 pm
    Permalink

    I currently have ip fox pro, through another supplier, but these last few weeks many channels are not streaming? Predominately it’s the uk package not playing?
    Is your subscription package experienceing the same problem. If not could you advise on your subscription cost.
    My box is the openbox v9s, and has been trouble free these last couple of years.

    Reply
  • November 10, 2019 at 7:00 pm
    Permalink

    What is the model number? Thanks.

    Reply
  • October 28, 2020 at 10:02 pm
    Permalink

    Hello
    Is it possible to upload other software to the V9S tuner?
    Android or something like Enigma2

    Reply
    • October 31, 2020 at 2:23 am
      Permalink

      Dear Andrzej, the SOLOVOX V9S does not support the third software. However, if you want to apply your IPTV, you can get it through the M3U, Xtream codes, Stalker. Also, our MARS TV X IPTV service app is installed by default.

      Reply

Leave a Reply to Admin Cancel reply

Your email address will not be published. Required fields are marked *