Recover SOLOVOX V6S to solve most of software problems

Sometimes, the SOLOVOX V6S may appear the problem of playing because of improper option, such as the playing is not smooth. Actually, for most of the box’s problems, we can easily solve it by recovering a new firmware file.

This approach is very efficient and the accuracy is good enough. All you need is a U disc and the firmware file.

Recover the SOLOVOX V6S

  • Please download the firmware file from the Download page, such as the V2236 firmware file V2236_SOLOVOX_V6S_LEDF_SKV9.bin.gz
  • Please unzip the firmware file you downloaded, you should get a bin file, such as V2236_JS_UNETIN_AUTH_XTREAM_QUICKEPG_STALKER_SWDOLBY_IPFOX_AVATAR_IPFOXADULT_BIGLOIP_LOGIN_NEWLED_CHNLIST3COL_MENA_SOLOVOX_TRUE_V6S_LEDF_SKV9.bin
  • Please rename the firmware file to romnew.bin and transfer to the root directory of the U disc
  • Please Power Off the SOLOVOX V6S satellite device
  • Plug the U disc into the SOLOVOX V6S satellite device
  • Power On the satellite device and press the Menu button on the remote control quickly and continuously until you see the Download From USB screen
  • The SOLOVOX V6S is now recovering
  • Once the recovering process is completed, the SOLOVOX V6S will reboot automatically

This, of course, is a very important solution for fixing software problems, it can even solve that the SOLOVOX V6S doesn’t normally boot. Anyway, most of the software issues that you could encounter will be identified by this solution, and in many cases, the solution will offer a quick fix to resolve them.

15 thoughts on “Recover SOLOVOX V6S to solve most of software problems

  • July 22, 2020 at 3:48 pm
    Permalink

    Every 7min v6s rebooting!!
    Czeh language have not!
    Can you help me?

    Reply
    • July 26, 2020 at 12:08 am
      Permalink

      Hello Laco, so strange? So I suggest that you try to reset your V6S to the factory mode for fixing. For the Czech language, the V6S is not supported.

      Reply
  • August 14, 2020 at 4:16 pm
    Permalink

    Hello, selfreboot every 6-7 min. apparently related to the programmed decoder cccam, software versions did not solve it. I tried more versions. I sent the exact information to the seller at aliexpress – solovox oficial store. However, if your receivers do not do this, then I have a faulty piece from you.

    Reply
    • August 15, 2020 at 12:58 am
      Permalink

      Hello Laco, if you always do not solve your problem, I suggest that you contact your seller and ask for replacing a new motherboard. It may be also a problem with the motherboard caused by some special situations such as transportation etc.. However, I am not sure the problem of your device, because there is no feedback about a similar problem. Anyway, try to contact your seller and ask for replacing a new motherboard. If you are purchased from the official SOLOVOX AliExpress store, you can easily contact our AliExpress team through the AliExpress store.

      Reply
    • October 16, 2021 at 7:52 am
      Permalink

      Hi!
      I was try to use the recover of solovox V6S to fix some issues with my receiver but the solution is not working even after renaming it to romnew.bin. Its say that the file cannot be read. How can this be solved.
      I’ll appericate your help.
      Regards
      Oliver Mbuzi

      Reply
  • October 10, 2021 at 9:55 am
    Permalink

    Hi,
    I have just updated my Solovox V6s to V3.1.39 firmware version and now I do not have any details / infos regarding programs.
    Message read on EPG content/. No data for this channel
    Could somebody help?
    Thanks
    Herve

    Reply
    • October 19, 2021 at 1:14 am
      Permalink

      Hello Friend, you need to reload your channel list after updating new firmware.

      Reply
  • October 28, 2021 at 6:21 am
    Permalink

    Hi,
    I have reloaded the channel list but got “no data for this channel message ” while asking summary for programs of channels

    Reply
    • October 30, 2021 at 1:37 am
      Permalink

      Did you try to rescan the channel?

      Reply
  • October 30, 2021 at 5:30 am
    Permalink

    Hi,

    Yes, I have rescanned all channels but the problem is still the same for all

    Reply
    • October 30, 2021 at 6:13 am
      Permalink

      Dear Jean, please directly WhatsApp our team (+8618665886944) for your questions. Please send some photos to WhatsApp for reference.

      Reply
  • May 14, 2023 at 11:29 am
    Permalink

    despues de cargar nuevo soguar no hace nada en el display sale un uno le doi al boton power carga hasta cien pero vuelve al numerouno y hay se queda

    Reply
    • May 27, 2023 at 1:31 am
      Permalink

      Hello friend, Is your mean that your device do not reset? Anyway, for more information, you can talk it with our team WhatsApp.

      Reply

Leave a Reply to Oliver Mbuzi Cancel reply

Your email address will not be published. Required fields are marked *