Use SOLO CAM on SOLOVOX decoders

#191013 The SOLO CAM function has been integrated into advanced Power CW function, and also you do not need any activation code, just enable Power CW option

Just a few minutes ago, we announced the new SOLO CAM function.

This free CAMDs function will obviously increase your SOLOVOX experience. So, how to use this new SOLO CAM service on our SOLOVOX satellite devices? That’s why you are here.

Use SOLO CAM on SOLOVOX decoders

As we mentioned earlier, the SOLO CAM is currently live for the SOLOVOX V6S users, so we take the SOLOVOX V6S as an example.

  • Firstly please online update your SOLOVOX V6S to the latest V21.40 software version
  • Please Enable the hidden Camds Setup option on SOLOVOX V6S
  • Please enter into the Camds Setup, you can see new Solo Cam service
  • Please enter into the Solo Cam, you can see Switch option is Off, please switch it to On state
  • Please highlight the Active Code
  • Please enter into the Active Code and type your activation code which you got from the SOLOVOX
  • Once you have typed the activation code, please Connect it

Please kindly note that the SOLO CAM is still in the test stage, it may be unstable. Actually, we haven’t made heavy use yet. But anyway, as you know, it is a new year gift.

37 thoughts on “Use SOLO CAM on SOLOVOX decoders

  • December 31, 2018 at 5:27 am
    Permalink

    This is really a great improvement. May you please tell me which encrypted channels can solo cam open. And is it possible to track them here in Central Africa?

    Reply
    • December 31, 2018 at 7:00 am
      Permalink

      Hello Oliver, our Customer Service (customer@solovox.xyz) has sent a 1-year SOLO CAM activation code to you.

      Reply
      • March 18, 2019 at 7:55 pm
        Permalink

        Witam proszę o kod aktywacyjny do solo cam

        Reply
        • March 21, 2019 at 9:07 am
          Permalink

          Hello Bogdan,

          Our customer service has sent one 1-year to you through Email.

          Thanks,

          Reply
  • March 13, 2019 at 10:04 pm
    Permalink

    Hi is the free Solo Cam gift still available, if so could you send me an activation code please.

    Reply
    • March 14, 2019 at 12:44 am
      Permalink

      Yes, David, it is of course available. Our customer service (customer@solovox.xyz) has just sent a 1-year code to you. As we mentioned, the SOLO CAM is currently only available for SOLOVOX V6S.

      Best Regards,

      Reply
      • April 30, 2022 at 1:46 pm
        Permalink

        Hi I try find solo cam ? Can you help me please

        Reply
        • May 6, 2022 at 3:06 am
          Permalink

          Hi Artur, this is just an alpha item. You can directly speak with our team manager through WhatsApp (+86 18665886944).

          Reply
    • March 14, 2019 at 6:16 pm
      Permalink

      Hi thanks for free 1 yr Solo Cam activation code, I have updated my solovox V9S to the latest software V.2046 from download. But The Solo Cam Icon is not on the camds set up screen.
      Have you released the software update that contains Solo Cam for the V9S if so could you let me have it please?

      Reply
  • March 18, 2019 at 7:59 pm
    Permalink

    Kupiłem dekoder Solovox v6s ale ma on problem że po podłączeniu do sieci co chwila wyłącza się samoczynnie. Czy w związku z wyłączaniem się dekodera czy jest możliwaść zmiany oprogramowania na v6.

    Reply
    • March 21, 2019 at 9:02 am
      Permalink

      Hello Bogdan,

      Where you bought your SOLOVOX V6S? Please don’t flash the V6’s firmware to your V6S. And is your SOLOVOX V6S’s firmware version latest? Please try to online update it.

      Thanks.

      Reply
  • March 19, 2019 at 3:44 pm
    Permalink

    Is there any chance that this works in Equatorial Guinea?

    Reply
    • March 21, 2019 at 8:57 am
      Permalink

      Hello Antonio,

      We are not sure whether our SOLO CAM is available in your country. If you like it, you can contact our customer service through Email, then we can send a test code to you.

      Thanks.

      Reply
      • February 19, 2020 at 4:09 pm
        Permalink

        Hi, am in need of a free solo cam activation code. Can please help.

        Reply
  • March 30, 2019 at 12:03 pm
    Permalink

    Can someone explain which encrypted channels are opened by solo cam specially here in Central Africa. I want to know.

    Reply
  • July 12, 2020 at 6:08 pm
    Permalink

    kupiłem kilkanaście solovox v6s czy otrzymam kod solo cam mam 12 sztuk
    czy idzie wgrać do v6s oscam zamiast cccam i jak to zrobić

    Reply
    • July 15, 2020 at 8:24 am
      Permalink

      Hello Friend, V6S is not supported for OSCAM.

      Reply
  • July 12, 2020 at 6:13 pm
    Permalink

    czy mogę otrzymać na email .TP PROG POLAND 20200630 UPDATE DB
    BO MOJE DEKODERY NIE CHCĄ POBRAĆ AUTOMATYCZNIE SOFT POBRAŁY DB NIE POZDRAWIAM

    Reply
    • July 15, 2020 at 8:27 am
      Permalink

      Hello friend, if you have a good Poland TP, we can put it on our server after checking.

      Reply
  • July 17, 2020 at 8:42 pm
    Permalink

    czy mogę otrzymać na email .TP PROG POLAND 20200630 UPDATE DB
    BO MOJE DEKODERY NIE CHCĄ POBRAĆ AUTOMATYCZNIE SOFT POBRAŁY DB NIE POZDRAWIAM
    CHCIAŁBYM OD WAS OTRZYMAĆ BO MOJE DEKODERY NIE POBIERAJĄ TP POLAND
    OD SOFTU V23.30- V31.11.

    Reply
    • July 19, 2020 at 5:55 am
      Permalink

      Hello friend, if you just need a firmware package, you can easily download it from our Download page. However, V6S software is supported with online OTA update.

      Reply
  • July 17, 2020 at 8:57 pm
    Permalink

    MAM JESZCZE JEDEN PROBLEM NA HOTBIERD 13 NA WSZYSTKICH SOFTACH
    CO 2 -3 MINUTY RESETUJE SIĘ DEKODER NA TYM PROGRAMIE TVP 2 . 12264/27500V .I RACZEJ JEST TO WINA SOFTU INNE PROGRAMY DZIAŁAJĄ .KUPIŁEM 12 SZTUK SOLOVOX V6S I NA WSZYSTKICH TO SAMO

    MOIM ZDANIEM TO ŻE DEKODERY NIE POBIERAJĄ AUTOMATYCZNIE TP ŻADNEGO TO TEŻ WINA SOFTU .BO NA STSARYCH SOFTACH GDZIE NIE MA POLAND POBIERAJĄ NA NOWYCH SOFTACH ŻA DNEGO

    MARSTV X STALKER TEŻ NIE PRACUJE POPRAWNIE FILMY VOD POLAND ZAWIESZAJĄ SIĘ , LIVE POLAND HD TEŻ BUFERUJĄ ZACINAJĄ SIĘ .PROSZĘ O POMOC BO NIKT MI NIE KUPI TYCH DEKODERÓW Z CCCAM POZDRAWIAM SERDECZNIE .KRZYSZTOF

    Reply
    • July 19, 2020 at 6:00 am
      Permalink

      Dear friend, according to our test, our IPTV service MARS TV X is currently workable on V6S. I suggest that you contact our AliExpress team for your question through the AliExpress store, there you can get a quicker response.

      Reply
    • August 12, 2020 at 9:00 am
      Permalink

      oni mają wywalone i nic nie robią. To nie jest problem tylko tego softu . Kupiłem dla siebie i znajomych chyba z V6s i wszystkie na TVP 1,2, Polsat generalnie non stop się resetują , wysyłałem im video z nagraniem jak to wygląda i w dupie mają

      Reply
      • August 15, 2020 at 1:18 am
        Permalink

        Dear Dariusz, we always focus on improving our products. we have many users in Europe. If your box is purchased from the official SOLOVOX AliExpress store, you can easily contact our AliExpress team through the AliExpress store.

        Reply
  • July 21, 2020 at 8:37 pm
    Permalink

    CCCAM HOTBIERD TVP 2 I KILKA INNYCH NA SOFCIE 31.11 RESETUJE SIĘ BARDZO CZĘSTO MAM NAGRANIA NA SOFCIE 31.04 NIE MA GŁOSU NA PEWNO NA N-SPORT I KILKU INNYCH WYSTARCZY ZAKTUALIZOWAĆ DO 31.11 I GŁOS JEST ALE RESET DEKODERA PROSZĘ POPRAWCIE SOFT BO KLIENCI MNIE ZLINCZUJĄ NIE BEDE MÓGŁ SPRZEDAĆ POZDRAWIAM SERDECZNIE KRZYSZTOF

    Reply
    • July 26, 2020 at 1:03 am
      Permalink

      Hello friend, you mean is that 31.11 firmware’s CCCAM reset often for you? And is 31.04 firmware’s CCCAM expereince OK for you?

      Reply
      • July 28, 2020 at 8:24 pm
        Permalink

        I mean, it is software problem – cam decoder in receiver! This software have more more problems. Bdw. Favorite group chanell settings….., chanell seek manualy with TP setting….
        When you have, can you send me link for good software version? Thanks. Laco

        Reply
        • August 9, 2020 at 12:08 am
          Permalink

          Hello Laco, once we have a new software version, we usually put it on our update server for our customers to online update.

          Reply
  • August 20, 2020 at 2:17 pm
    Permalink

    Hello admin, selfreboot is big problem!!!! Pls renew software!!!! This receiver (solovox V6S) heve more more software problems. It is incorrect to sell such a failure. I trust you will quickly put the working software on the site. I sent all the findings to the solovox oficial store on aliexpress, it seems to me that they are just arguing ….. I believe I will be wrong.

    Reply
    • August 23, 2020 at 1:56 am
      Permalink

      Hello Laco, Actually, we have sold lots of V6S in many countries such as Portugal, Spain, Brazil etc.. There is not much the problem of the self reboot. It is a good satellite device. And we have let some enthusiastic Poland users record some data stream rate, and according to our engineer team, it may be the problem of live frequency of the operator of your country. And then our engineer team focus on modifying some software data for Poland and Slovakia markets, our team will send new software to you for testing soon.

      Reply
  • September 1, 2020 at 6:25 pm
    Permalink

    In order for the receiver to be perfect, I tried to help with my findings in software problems. No need to accommodate data flows …. Software bugs need to be resolved by the end. Selfreboot managed to solve in one part, which is great. it is necessary to continue eliminating other errors and then the receiver will be perfect!

    Reply
  • September 6, 2020 at 5:16 pm
    Permalink

    Help me with solocam account. I need to test it on my solovox v6 receiver. I will appreciate your help.

    Reply
    • September 12, 2020 at 12:33 am
      Permalink

      Hello Oliver, SOLOCAM is just suitable for SOLOVOX V6S. V6 is not suitable. And also, SOLOCAM is just available in individual Europian countries.

      Reply
  • September 12, 2020 at 5:16 am
    Permalink

    Hello admin, would you help me with marstv test code.

    Reply
    • September 12, 2020 at 9:13 am
      Permalink

      Hello Oliver, as I told previously, please directly contact our AliExpress team for any test code such as MARS TV X, CCCAM, etc.

      Reply

Leave a Reply to Krzysztof Cancel reply

Your email address will not be published. Required fields are marked *